During one of my Estate Sale shopping trips I found an old Victrola record cabinet that needed some fixing up. About a quarter of the veneer on the top of the cabinet was missing. A chunk of wood was also missing on one of the doors on the front.
For the door I had to take out the old screw and add a longer one so it would connect from the bottom of the hinge into the wood that wasn’t damaged. My first attempt didn’t work but I eventually was able to get a long enough screw into place so whe door would open and close with the hinge.
I used wood putty and sanded it so I could paint over it.
Back to the veneer top. I’ve used wood putty to fix veneer before but this area was too big to fix so it needed to come off. I tried just scraping it but quickly realized that wasn’t going to work. So I did a quick search on Pinterest and found a solution.
I took an old towel and got it wet and laid it over the veneer I wanted to remove. Be careful not to get any veneer you don’t want to remove wet. You don’t want any warping on veneer you want to keep. I would scrape off the parts that would come off easily and then lay the towel back down and spray it with a water bottle to let it soak into the veneer. I had to do this a few times. The towel needs to be pretty wet, not dripping wet but almost. I would let it sit for about an hour to let it get into and under the veneer. The glue holding the veneer down will soften up making it easier to scrape off. You can see from the picture I just used a putty knife.
This method worked really well for me, and then I just needed to sand it down for a smooth finish and paint it!
I painted this one Annie Sloan Napoleonic Blue. I finished it with clear wax and added Annie Sloan Bright Silver Gilding Wax to some of the edges. I replaced the old pulls with small glass door pulls to finish the look I wanted.
The record player had been removed from the inside so it makes a great storage cabinet.
I love taking taking an old piece of furniture and fixing it up so it’s beautiful and ready to be used again.
Hope you find this helpful. And thanks for stopping by. If you want to see more transformations and helpful hints take a minute to sign up for my emails.